Misc (10.5)
May 14, 2010 – Ordered Wing Kit
Aug 16, 2010 – Christmas in August (Wing Kit Arrived) (5.0)
Dec 29, 2010 – Started Building Wing Stands (2.0)
Dec 30, 2010 – Finished Building Wing Stands (3.5)
Spars (19.0)
Aug 22, 2010 – Right Spar Countersinking and Nutplates (3.5)
Aug 24, 2010 – Finished Countersinking Right Spar Flanges (1.0)
Aug 26, 2010 – Started On Right Wing Tie-down Bracket (1.0)
Sep 05, 2010 – More Right Tiedown Work, Started Right Rear Spar (2.0)
Sep 08, 2010 – Right Rear Spar Doubler and Reinforcement Fork (1.0)
Sep 12, 2010 – Primed and Started Riveting Right Rear Spar (2.0)
Sep 14, 2010 – Finished Right Rear Spar (0.5)
Sep 21, 2010 – Left Spar Arrived from Vans
Sep 28, 2010 – Leading Edge/Tank Cradle, Right Tiedown Bracket (0.5)
Oct 21, 2010 – Tank Attach Nutplates, Left Lower Spar Flange (1.0)
Oct 23, 2010 – Tank Attach Nutplates, Left Upper Spar Flange (0.5)
Nov 13, 2010 – Countersunk Left Main Spar, Drilled Left Rear Spar (1.5)
Nov 20, 2010 – Prep and Priming Some Rear Spar Comp. (1.5)
Dec 12, 2010 – Finished Left Rear Spar (1.5)
Dec 29, 2010 – Finished Left Tiedown (1.0)
Feb 26, 2011 – Started Countersinking Right Main Spar (0.5)
Ribs (18.0)
Sep 18, 2010 – Prepped Right Wing Main Ribs, Clecoed Skeleton (3.0)
Sep 29, 2010 – Drilled right Wing Ribs to Main and Rear Spars (1.0)
Oct 03, 2010 – Drilled Wiring and Conduit Holes in Ribs (1.0)
Jan 01, 2011 – Fluting and Straightening Left Wing Ribs (1.0)
Jan 02, 2011 – Leading Edge Rib-To-Spar Drilling (2.0)
Jan 06, 2011 – Prepped and Primed First Wing Rib (1.0)
Jan 07, 2011 – Primed 3 More Main Ribs (1.0)
Jan 08, 2011 – Primed 3 More Main Ribs, Now 7 Done (1.0)
Jan 09, 2011 – Riveted Half of Main Ribs to Right Main Spar (1.0)
Jan 13, 2011 – More Right Wing Main Rib Preparation (1.5)
Jan 18, 2011 – Finished Prepping and Priming Right Wing Main Ribs (1.5)
Jan 21, 2011 – Finished Riveting Right Wing Main Ribs to the Main Spar (1.0)
Jan 23, 2011 – Riveted the Right Rear Spar to the Main Ribs (1.5)
Dec 14, 2011 – Riveted Some Things on the Right Rear Spar (0.5)
Wing (60.5)
Sep 21, 2010 – Devinyled Right Lower Inboard Wing Skin (0.5)
Sep 22, 2010 – Devinyled Left Lower Inboard Wing Skin (0.5)
Sep 23, 2010 – Devinyled Upper Inboard Wing Skins (1.0)
Sep 28, 2010 – Leading Edge/Tank Cradle, Right Tiedown Bracket (0.5)
Oct 04, 2010 – Devinyled Left Lower Outboard Wing Skin (0.5)
Oct 06, 2010 – Devinyled Two More Wing Skins (1.0)
Oct 18, 2010 – FINISHED DEVINYLING WING SKINS (0.5)
Jan 03, 2011 – Mucho Leading Edge Work (3.5)
Jan 04, 2011 – Stall Warning Access Panel Work (0.5)
Jan 16, 2011 – Started Leading Edge Landing Lights (3.5)
Jan 23, 2011 – Right Wing Top Skins Clecoed to Skeleton (0.5)
Jan 25, 2011 – Started Leveling Right Wing for Good (1.0)
Jan 30, 2011 – Continuing to Level Right Wing Skeleton (1.5)
Jan 31, 2011 – Clecoed Bottom Skins and Leading Edge on Right Wing (1.5)
Feb 07, 2011 – 50% Clecoed Right Wing Skins (1.0)
Feb 08, 2011 – Started Matchdrilling Right Wing (1.0)
Feb 12, 2011 – Finished Matchdrilling Right Wing (0.5)
Feb 27, 2011 – Deburred Right Fuel Tank Ribs, Bottom Wing Skins (1.0)
Mar 13, 2011 – Some Right Leading Edge Work (1.5)
Mar 25, 2011 – Started Prepping Right Leading Edge (1.0)
Apr 22, 2011 – Started Banging Rivets on the Right Leading Edge (3.0)
Apr 28, 2011 – Prepared Right Leading Edge Rib Number 4 (0.5)
May 10, 2011 – Some More Work on Right Leading Edge Ribs (0.5)
May 12, 2011 – Primed Three More Leading Edge Ribs (0.5)
May 13, 2011 – Set Eight Rivets (0.5)
May 23, 2011 – Riveted Some More Right Leading Edge Ribs (1.0)
Jun 17, 2011 – Right Leading Edge Inboard Rib Redux (0.5)
Jun 20, 2011 – Riveted Right Inboard Leading Edge Rib (0.5)
Jul 10, 2011 – Right Leading Edge Landing Light (1.5)
Jul 13, 2011 – Right Leading Edge Joint Plate Nutplates (1.0)
Jul 23, 2011 – Right Float Sender, Riveted Leading Edge to Spar (2.5)
Jul 25, 2011 – Finished Drilling Right Top Skins, Started Deburring (1.0)
Jul 28, 2011 – Started Deburring and Dimpling Right Wing Ribs (0.5)
Jul 29, 2011 – Deburred Right Upper Outboard Wing Skin, Right Leading Edge Rivets (1.0)
Jul 30, 2011 – LEAK FREE RIGHT TANK, Right Leading Edge Rivets Part Deux (1.5)
Jul 31, 2011 – Dimpled Right Upper Wing Skins (3.0)
Aug 01, 2011 – Preparing the Right Top Skins (2.5)
Aug 02, 2011 – Started Riveting Right Top Skins (1.0)
Aug 04, 2011 – Riveted Right Wing Top Skin Wingwalk Area (3.0)
Aug 06, 2011 – A Few Things Before More Top Skin Riveting (1.5)
Aug 08, 2011 – Riveted Aileron Brackets (2.0)
Aug 10, 2011 – Riveted Some of Right Wing Top Skins (2.0)
Aug 11, 2011 – More Right Top Skin Riveting Prep (1.0)
Sep 03, 2011 – Finished Riveting Right Wing Top Skins (1.5)
Dec 11, 2011 – Constructed Wing Cradle (2.5)
Dec 12, 2011 – Right Flap Brace and Aileron Gap Fairing (0.5)
Dec 14, 2011 – Riveted Some Things on the Right Rear Spar (0.5)
Dec 19, 2011 – Riveted Right Aileron Gap Fairing (1.0)
Fuel Tanks (46.0)
Nov 28, 2010 – Devinyled Right Tank (1.0)
Nov 30, 2010 – Devinyled Left Tank (1.0)
Feb 20, 2011 – Matchdrilled Right Tank Z-Brakets (1.0)
Feb 22, 2011 – Riveted Nutplates on Right Wing Z-Brackets (1.5)
Feb 26, 2011 – Right Tank Work (3.0)
Feb 27, 2011 – Deburred Right Fuel Tank Ribs, Bottom Wing Skins (0.5)
May 25, 2011 – Prepped and Clecoed Right Tank Ribs to Tank Skin (1.0)
May 26, 2011 – Matchdrilled Right Tank Ribs and Baffle (1.0)
May 27, 2011 – Right Tank Stiffeners, Z-Brackets, and Countersinking (1.0)
May 28, 2011 – Drilled Right Tank Drain and Cap (0.5)
May 30, 2011 – Right Tank Stiffener Prep (1.5)
Jun 03, 2011 – Deburred and Scuffed Right Tank Skin (1.5)
Jun 04, 2011 – Dimpled Right Tank Skin (1.5)
Jun 05, 2011 – Right Tank Inboard Rib Work (2.0)
Jun 06, 2011 – Inboard Tank Attach Bracket (1.5)
Jun 08, 2011 – Riveted Right Tank Stiffeners (2.0)
Jun 09, 2011 – Riveted Right Tank Drain Flange and Fuel Cap Flange (1.0)
Jun 11, 2011 – Fixed Right Vent Clip Omisison (0.5)
Jun 14, 2011 – Right Tank Rib Prep (1.0)
Jun 15, 2011 – One Right Tank Rib Done (1.0)
Jun 18, 2011 – Two More Right Tank Ribs Sealed (3.0)
Jun 21, 2011 – Outboard Right Tank Rib Sealed (1.5)
Jun 22, 2011 – Right Tank Outboard Rib Reinforcement (0.5)
Jun 26, 2011 – Last of the Interior Right Tank Ribs (3.0)
Jun 29, 2011 – Rivet Encapsulation on Right Tank Ribs (1.0)
Jun 30, 2011 – Right Tank Plumbing (0.5)
Jul 04, 2011 – Sealed Right Tank’s Inboard Rib (2.0)
Jul 06, 2011 – Right Tank Baffle and Skin Finishing (1.0)
Jul 07, 2011 – Right Tank Float Sender (1.5)
Jul 17, 2011 – Totally (Almost) Sealed Up Right Tank (5.0)
Jul 23, 2011 – Right Float Sender, Riveted Leading Edge to Spar (0.5)
Jul 30, 2011 – LEAK FREE RIGHT TANK, Right Leading Edge Rivets Part Deux (1.5)
Ailerons (27.5)
Dec 04, 2010 – Devinyled Aileron Skins (1.0)
Aug 13, 2011 – Started on the Ailerons (1.0)
Aug 14, 2011 – I Hate Making Stiffeners (2.0)
Aug 15, 2011 – I Hate Drilling Stiffeners (1.0)
Aug 24, 2011 – I Hate Dimpling Stiffeners (0.5)
Aug 29, 2011 – Deburred and Scuffed Aileron Stiffener Holes (0.5)
Sep 03, 2011 – Finished Riveting Right Wing Top Skins (0.5)
Sep 05, 2011 – Riveted Aileron Stiffeners (2.5)
Sep 11, 2011 – Mucho Aileron Work (2.5)
Sep 12, 2011 – Deburred Right Aileron Spar (1.0)
Sep 14, 2011 – Ten Right Aileron Rivets (1.5)
Sep 15, 2011 – Dimpled Right Aileron Leading Edge (0.5)
Sep 16, 2011 – Clecoed Together the Right Aileron (1.0)
Sep 17, 2011 – Finished the Right Aileron (3.0)
Sep 25, 2011 – Some Left Aileron Deburring (1.0)
Sep 29, 2011 – Prepped Left Aileron Parts (1.5)
Oct 02, 2011 – Primed Left Aileron Parts (1.0)
Oct 05, 2011 – Finished the Left Aileron (2.5)
Dec 28, 2011 – Aileron Mounting and Flap Seal (3.0)
Flaps (20.5)
Oct 06, 2011 – Started the Left Flap (1.0)
Oct 09, 2011 – Drilled Left Flap Hinge (0.5)
Oct 23, 2011 – Some More Left Flap Work (1.5)
Oct 30, 2011 – Last of the Left Flap Fabrication (1.0)
Nov 06, 2011 – Primed Some Left Flap Parts (1.5)
Nov 16, 2011 – Deburred, Dimpled, and Primed Left Flap Lower Skin (1.0)
Nov 25, 2011 – Riveted Left Flap Lower Skin (2.5)
Nov 26, 2011 – Finished the Left Flap (2.0)
Dec 28, 2011 – Aileron Mounting and Flap Seal (1.0)
Dec 29, 2011 – Started the Right Flap (3.0)
Jan 08, 2012 – Some Right Flap Work (1.5)
Jan 17, 2012 – Drilled Right Flap to Wing (2.0)
Jan 22, 2012 – Right Flap Hinge Retention (2.0)
Take me back to the Builder’s Log.
