Advertisements
 

Started Leveling Right Wing for Good

Prev | Next

Well, tonight was kind of crappy. I started leveling the wings and ended up undoing all the work I did last time (clecoing on the skins felt productive!).

First, I set up my two new plumb bobs with some string.

Exciting picture, huh.

Then, I hung the plumb bobs and realized that with the skins clecoed to the wing, I wasn’t going to be able to easily clamp the skeleton into perfect alignment. Instead of messing with it, I quickly made the decision to backtrack and get to a bare wing skeleton for alignment adjusting.

After pulling off the skins, I played a little with my adjustable stands and realized I’m going to need my lower braces before going any further.

I cut two 8-inch pieces of angle to use for the lower braces. One of these will need an additional piece of aluminum before clamping to the outboard rib.

I didn’t have time to mount up my angles, so all I did before going inside was to more accurately measure the wing twist.

At the inboard edge, looks like I have 2.25".

The outboard edge is pretty much at 2.75."

Hmm. That’s a 1/2″ of twist.

I think after clamping the aft spar in place, I’ll be able to minimize the twist. Maybe more tomorrow.

1.0 hour.

Prev | Next

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: