More Right Lower Inboard Skin Riveting

Prev | Next

Today, while waiting for the DirecTV guy to show up (insert long story here about how I took the whole afternoon off to cover his time (12-4pm) and then he didn’t show up until 5:30pm), I ended up taking some time out for the airplane.

Taylor and I riveted six rivets on the inboard edge the last time he was over. It turns out, I really needed to bend the forward edge of the skin “up” in the picture to reach the aft row of rivets.

So, I drilled out three of the rivets, and was able to reach in from just below the main spar (bottom of these pictures) to buck the top row of rivets.

After setting the top (aft? oh man, we’re going to have trouble communicating with our different frames of reference) row of rivets, I worked down one rivet at a time for the two middle wing-walk ribs. (The inboard or left rib can be squeezed at the end, and the outboard wing-walk rib can be bucked by reaching from outboard after the wingwalk ribs are done.

Here’s the top row riveted.

To help me know where I was, I colored each rivet black with a magic marker after setting it.

After an hour, I made it about halfway down the rib.

From here on, I won’t be able to peel the skin back from the bottom anymore, but I should be able to reach in through the inboard rib, where the lightening holes are now big enough for my huge biceps.

1.0 hour, 33 rivets. 3 (originally perfect) rivets drilled out due to lack of planning. Boo.

Prev | Next

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: